Description
The PhosLess Flow 3000 from Oase is an in-line cartridge which effectively and reliably reduces high phosphate concentrations in ponds and water features below the limit required for algae growth.The compact cartridge contains a special granulate with excellent absorption properties which can lower the phosphate levels to 0.035 mg/l and bind a total of up to 90g of Phosphate PO₄³. By lowering the levels of phosphates within the pond or water feature this will prevent further algae growth.The Phosless Flow 3000 has an optimum flow rate of between 300 l/h and 3,300 l/h with a recommended flow of 300 l/h for every 10,000 litres of pond volume. Multiple cartridges can be used in parallel to increase the flow capacity if required.The cartridge features 2" BSP or 50mm/2" flexi hose connections for simple in-line installation and can be easily back-flushed by reversing the water flow direction.Installation Note:A delivery head of 3m should be taken into account when choosing a suitable pump for the installation of the Oase PhosLess Flow 3000. Also note that in the case of unfiltered water the Oase Secure Flow 3000 should be used as pre-filter prior to the Oase PhosLess Flow 3000 to prevent contamination.Total binding capacity up to 90g of phosphate PO₄³Granulate absorbs phosphate quickly and effectivelyExcellent absorption properties up to low concentrations of 0.035 mg/l (minimum for algae growth)Ideal for starting at values greater than 0.2 mg/l PO₄³Intelligent water management in the cartridge enables faster absorption of phosphates with PhosLessEasy and safe cartridge replacement – screw-on hose connections includedOptimal for a flow of between 300 l/h and 3300 l/hRecommendation: A flow rate of 300 l/h for each 10 m³ of pond volumeA pressure loss of 3m head should be considered when choosing a suitable pumpEasy and safe cartridge replacement – screw-on hose connections includedCan be installed in or out of the pondCan be used/retrofitted in natural and fish ponds as well as swim ponds
