HOTweezers 7A ESD Thermal Wire Strippers 36 AWG - 24 AWG

These ESD safe thermal wire strippers are manufactured by Meisei Coprporation and fit easily within the operators hand, as they are shaped like a pair of cut-off tweezers, which weigh only 57g (just under two ounces).The most unique feature about Hotweezers wire strippers is the fact that the heater filaments are completely sealed within the stripping head, meaning a greater portion of the heat generated is retained to do useful work. Another benefit of the heat being targeted closely to the work at hand is that the power supply can be much smaller, as the power consumption of the wire strippers is vastly reduced. We recommend you use HOTweezers with the ESD safe M-20 power supplyThe stripper head is produced from high-strength, high temperature alloy with very good oxidation and wear properties. The strength of the metal used to create this head, as well as the extreme targeting of the heat produced means that the stripping head will not distort nor lose alignment, which is often the case with ordinary hot wire strippers. Wire holes can be ground into the stripping head without damage to the filaments. With wire holes, the rotation of the stripper required to accomplish a strip is reduced from 180* to 15* and the mashing of conductors, especially finer gauges, is completely eliminated  This product is CE marked, meaning it is safe to use in the European Economic Area and meets the standards of MII-STD-2000A.