RO-1600 GPD Reverse Osmosis System Pumped

RO-1600 GPD reverse osmosis system pumped water system with auto flushing membrane. 2 x 800GPD extra high capacity membrane 3113 and using only 36vdc Power.Comes with 3 x 10 inch pre filters, 2 x 800gpd reverse osmosis membrane, auto flush computer with 2 probe TDA meter.Simple construction and compact size, quickly installed and connected to a water supply. Ideal solution for those who need a lot of clean water for a koi pond or Quarantine system. All you need to do is to connect the RO system to a water supply.RO-1600 GPD Reverse Osmosis System Pumped Specifications:Supplied water temperature: 5 - 40 ° CMin. Water pressure: 20 psiMax. water pressure: 80 psiMax. the salinity of water: 2000 ppm (up to 5000ppm on request)Connection for 3/8" quick connect or 1/2"  3/4 '' BSPClean water supply hose: 3 / 8 ''Drain to the sewer: 1/4 ''Dimensions: Height 59 cm, Width 47 cm, Depth 31 cmRO-1600 GPD Reverse Osmosis System PumpedFiltration Filters10-inch 5-micron PP filter10-inch carbon block CTO filter10-inch 1-micron PP filter2 x 800 GPD RO membraneActive carbon post filterPUMP: 36V 2.8A (not continuous duty)VOLTAGE: 240vac transformer to 36Vdc 2.8ATRANSFORMER: 240vac transformer to 36Vdc 2.8ASOLENOIDS:  Solenoid valve 36V 3/8'' TUBE – 3/8''' TUBECOMPUTER BOARD: PREMIUM 36V-2TDSTDS CONTROL: INLET — OUTLET Reverse osmosis is a method of purifying water by pushing it through a semi-permeable membrane, the membrane allows pure water molecules through it, whilst impurities are flushed away. By using reverse osmosis, it is possible to remove all suspended solids, up to 98% of dissolved solids and virtually all bacteria, pesticides and viruses. Reverse osmosis has many benefits.At the heart of any reverse osmosis system is the membrane, water is forced under pressure through the membrane to a storage tank and the waste by-product goes to drain. In addition to the membrane reverse osmosis unit also incorporates pre-filters. This RO system will remove up to 99% of tap water contaminants.Typical removal rates (%) Sodium (99%), Calcium (99%), Magnesium (99%), Potassium (98%), Iron (99%), Manganese (99%), Aluminium (99%), Ammonium (97%), Copper (99%), Nickel (99%), Zinc (99%), Cadmium (99%), Silver (98%), Mercury (98%), Barium (99%), Chromium (99%), Lead (99%), Chloride (99%), Bicarbonate (98%), Nitrate (97%), Fluoride (98%), Silicate (98%), Phosphate (99%), Chromate (99%), Cyanide (95%), Sulphate (99%), Bromide (98%), Arsenic (99%), Selenium (99%), Bacteria (99%), Protozoa (99%), Amoebic Cysts (99%), Giardia (99%), Asbestos (99%), Oestrogen (99%), Sediment / Turbidity (99%)Important information to consider prior to ordering.Our Reverse Osmosis Systems are shipped fully assembled complete with a comprehensive instruction manual for easy DIY installation with no plumbing experience required.The effectiveness and productivity of RO systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your source water pressure and temperature.While manufacturers state that 60 psi is required at the membrane for full production, we know that not everyone's cold water is at 60 psi and 30 °C therefore, we remind you that you might get less than the stated GPD from your membrane, perhaps 50% or even less if your pressure and temperature are very low!If the flow rate is critical for you, you need to consider all these factors before choosing membrane size.Recommended specificationTemperature: membranes are designed to operate between 13 °C - 30 °CWater pressure: Min 40 psi, Optimum 80 psi, Chlorine content of no more than 0.1 ppmPH 2 - 11Please note: This Reverse Osmosis system is fitted with an intermittent use pump and not continuous duty pump, and manufactured for domestic use only.