1/2 inch Male Thread x 3/4 Hosetail Connector

1/2 inch Male Thread x 3/4 Hosetail Connector are specially designed to be used with 3/4 inch hose, they have a 1/2 inch BSP male thread externally.The 1/2 inch Male Thread x 3/4 Hosetail Connector facilitates the connection of a 1/2 inch Female BSP thread to a flexible hose with 20mm Internal diameter or 1 1/4" nominal bore hose.Can be connected to female BSP fittings of any material, such as brass taps. The use of PTFE tape is recommended for this. WRAS approvedDesigned to be used with PVC-U Pressure Pipe and Fittings.WRAS Approval : Any water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws. These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be of an appropriate quality and standard.Thermal PropertiesPVC-U shows very good characteristics in the temperature range from 0 to 60 Degrees Celsius. At lower temperatures the impact strength drops considerably.